Troubleshoot: Unit Fails to Discharge Snow

11/24/2013

Unit Fails to Discharge Snow

1. Chute assembly clogged

Stop engine immediately and disconnect spark plug wire. Clean chute assembly and inside of auger housing with clean-out tool or a stick.

2. Foreign object lodged in auger

Stop engine immediately and disconnect spark plug wire. Remove object from auger with a clean out tool or stick

3. Auger control cable needs adjustment

Refer to Auger Control test in your operator's manual

4. Auger belt loose or damaged

Check auger belts tension. Replace belt if worn, burnt, or cracked.

5. Shear pin(s) sheared

Replace with new shear pin(s)