The warranty on your snow thrower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, you should maintain your snow thrower as instructed in your owner's manual. You should check your oil level each time before you start the engine. After making sure the snow thrower is on level ground, remove the oil fill cap and wipe the dipstick cleaned. Reinsert the dipstick and screw the cap tight, wait for a few seconds, remove it and re de- oil level. If necessary, add oil until the full mark on the dipstick is reached, do not overfill.
Begin by making sure the snow throwers are on a level surface, remove the safety ignition key. Clean the area around the drained plug. Remove the oil dip stick and drain plug, and drain the oil into a suitable container. Wipe off any spilled oil from the snow thrower on engine, install the drain plug and tighten securely. Refill the engine with oil through the oil dipstick tube, pour slowly, do not overfill for approximate capacity in recommended oil type, check your owner's manual.
0 Comments
Highly featured and right for the job, that’s what you get with an Ariens Platinum Series Sno-Thro, available in 24 or 30 inch models, the Platinum series come with standard features like automatic traction control, quick turn chute rotation and hand warmers.
Hi, I’m Dick Andal from the Ariens company and I like to take a minute to share with you some of the key features of the Ariens Platinum Series Sno-Thro. Both models feature a 21 inch power housing and either a 24 or 30 inch clearing width. The Platinum series features a roll top lip and offset leading edges for strength and durability. The 2-stage design incorporates walled steel serrated augers that pulls snow into a powerful 14 inch, 3 blade high speed impeller that throws the snow up to 50 feet away. The Ariens Platinum Series are powered by a 250cc or 342cc Ariens Polar Force engine by Briggs & Stratton which features easy 1-2-3 start, a fuel shut off switch, an alternator and a large fill capacity. Ariens’ exclusive Polar Force Engine is certified to start in temperatures as low as 20 degrees below 0. New to all Ariens model this year is a commercial duty casting, top-filled gear case with alloy steel gears and synthetic gear oil not found in snow throwers at this valued price, because the gear case is a critical component in any snow thrower, Ariens backs up the gear case with a 5 year limited consumer warranty. The Ariens Platinum models feature an all steel dash panel with a powerful in-dash headlight along with simple and convenient controls for chute rotation, chute deflection and warmers and available at 6 forward and 2 reverse speeds. From the dash, the quick turn chute control rotates the chute 200 degrees to throw snow in any direction. The Platinum 24 and 30 gives you automatic traction control which delivers maximum power to both wheels while still allowing for effortless turning. You can’t go wrong with an Ariens snow thrower. They are made right here in the U.S.A, feature an all steel construction have a 3 year limited consumer warranty including the engine and have a 5 year limited consumer warranty on the cast or in gear case, that’s why Ariens is number 1 brand snow thrower in the world and that’s why we are “the King of Snow”. Engineered to deliver an unrivaled performance, that’s what you get with an Ariens Professional Series Sno-Thro. Available at 28, 32 or 36 inch models, the Professional Series includes the largest, most powerful snow thrower units in the Ariens family. These machines are durable and dependable and come with standard features like automatic traction control, commercial duty skid shoes and drift cutters.
I’d like to take a minute to share with you some of the key features of the Ariens Professional Series of Sno-Thros. All 3 models feature a 23 and a half inch tall housing and either a 28, 32 or 36 inch clearing width. The professional series features a roll top lip and heavy duty 12 –gauge side panels for strength and durability. The 2-stage design incorporates wall steel serrated auger that pulls snow into a powerful 14 inch, 3 blade high speed impeller that throws the snow up to 50 feet away. The Professional series is powered by a large 420cc Ariens Polar Force Pro Engine by Briggs & Stratton with a 120 volt electric start. This exclusive engine includes easy 1-2-3 start, a crankshaft balancer to significantly reduce vibration, a cast iron cylinder sleeve and a forged crankshaft for strength and durability. All Ariens model this year is a commercial duty casting, top-load gear case with alloy steel gears and synthetic gear oil not found in other snow throwers at this valued price. Because the gear case is a critical component at any snow thrower, Ariens backs up the gear case with a 5 year limited consumer warranty. The Professional series also features commercial duty reversible skid shoes that provide consistent performance and long life. And for extreme conditions, adjustable drift cutters to knock all packed snow and drifts with ease. All of the Professional models feature automatic traction control which delivers maximum power to both wheels while still allowing for effortless turning. You can’t go wrong with an Ariens Sno-Thro. They are made right here in the U.S.A, feature an all steel construction have a 3 year limited consumer warranty and 1 year limited commercial warranty including the engine and have a 5 year limited consumer and commercialwarranty on the cast or in gear case. That’s why Ariens is number 1 brand Sno-Thro in the world and "The King of Snow”. For more information, please contact your local snowblower expert: OttawaSnowBlowers.com |